HOW TO – Remove & Clean Spinet Pedal Board of an SU-Series A-Series or E Series Organ

If you have a Spinet Pedal board on an SU an A or E series Organ, such as the one shown below from an SU530 Stardust. You may find that some of the pedals sound scratchy and not working as good as they should.

This article will explain and show step by step how to remove them and thoroughly clean them, especially where the contacts are !

How to clean a Full Console Pedal Board

The content of this page is protected and only available to Members

To gain access to this post, you must first login as a Member . . . . if you are not a Member yet, you may like to consider one of our membership plans

Membership – Full or Membership – Life

HOW TO – Clean the Bass Pedalboard Contacts if not Working Properly

The full console bass pedals of all organs regarding of the year made, have to withstand quite a lot of heavy use, some may even say they take a lot of abuse ! Because of this, the bass pedals will start to fail at some point, not all at once but some of the pedals …

The content of this page is protected and only available to Members

To gain access to this post, you must first login as a Member . . . . if you are not a Member yet, you may like to consider one of our membership plans

Membership – Full or Membership – Life

Sometimes the lights go out ?

There can be times when some of the lights, such as rhythm, solo voices, orchestral voices, pre-set buttons, etc. can suddenly go out for no apparent reason  – especially on the older models ? Here is something you can check to fix and prevent this happening again.

The content of this page is protected and only available to Members

To gain access to this post, you must first login as a Member . . . . if you are not a Member yet, you may like to consider one of our membership plans

Membership – Full or Membership – Life

How to Clean Keyboard Contacts not working

At some time you may find that the contact of one of the keyboards keys is simply not working. The method shown here will show you step by step how to fix the problem yourself

The content of this page is protected and only available to Members

To gain access to this post, you must first login as a Member . . . . if you are not a Member yet, you may like to consider one of our membership plans

Membership – Full or Membership – Life

HOW TO – Make and Use Bench Riser Blocks

Take your playing to new heights! For whatever reason, you may wish or need to raise the height of the bench. This could be the case even with an OEM factory bench that matches the organ. Perhaps the player is a smaller adult or child. Whatever the case, if you need the bench height to …

The content of this page is protected and only available to Members

To gain access to this post, you must first login as a Member . . . . if you are not a Member yet, you may like to consider one of our membership plans

Membership – Trial, Membership – Full or Membership – Life

How to stop or reduce the hum on a Lowrey organ

If you’re experiencing a hum on your Lowrey organ, there are several potential causes and solutions to consider. Here are some steps you can take to troubleshoot and maybe resolve the issue:

The content of this page is protected and only available to Members

To gain access to this post, you must first login as a Member . . . . if you are not a Member yet, you may like to consider one of our membership plans

Membership – Trial, Membership – Full or Membership – Life

The Mystery of the Midnight Playing Ghost

Imagine how you would feel,  if in the middle of the night you came down stairs to get a drink from the fridge only to find you had left your organ on  . . . BUT the main power switch was off ?

The content of this page is protected and only available to Members

To gain access to this post, you must first login as a Member . . . . if you are not a Member yet, you may like to consider one of our membership plans

Membership – Trial, Membership – Full or Membership – Life

HOW TO – Adjust the After Touch on a Lowrey Stardust

ADVICE This setting is pertinent to the Lowrey Stardust, as it is the one i have. But if After Touch is a feature on your model, this should also apply ?

The content of this page is protected and only available to Members

To gain access to this post, you must first login as a Member . . . . if you are not a Member yet, you may like to consider one of our membership plans

Membership – Full or Membership – Life